Effect of the Coil Angle in an Inductively Coupled Plasma Torch: A Novel Two-Dimensional Model

A two-dimensional model has been developed for the calculation of the electromagnetic (EM) fields generated by spiral coil currents, in order to obtain a better representation of the actual configuration used in a typical inductively coupled plasma (ICP) torch. In order to obtain the EM fields in a two-dimensional model, the change of EM field in tangential direction is neglected and the coil is assumed to be a concentric cylinder. In order to justify our assumption, the EM, flow and temperature fields resulting from five-ring coil and concentric cylinder coil are compared and the results are almost the same except for the EM field in the vicinity of the coil. In the case of the spiral coil, the coil current is inclined with respect to the horizontal plane. Therefore current in the cylinder coil is assumed to have the same inclined angle, which is split into tangential and axial components. The axial electric field and hence an axial current in plasma is induced by the axial component of the spiral coil current. Charge density is accumulated in the plasma, since the axial current cannot form a loop. In order to obtain the EM field and the charge distribution in the plasma generated by the spiral coil, the equations of axial vector potential and electrostatic potential have been derived. Due to the swirling Lorentz force (J_z×B_r) an axisymmetrical swirling fluid model is used to simulate the plasma flow in an axisymetrical configuration. With an inclined angle of the coil current being 3.7° and the frequency being 3 MHz, computational results show that the swirling Lorentz force causes plasma swirling with a maximum speed of 3.41 m/s near the plasma center when the injected sheath gas and central gas are not swirling. In these conditions, the real and imaginary parts of the maximum electrostatic potential are 0.95 V and 1.66 V, respectively. When the electrostatic field is neglected, the swirling velocity of the plasma is 3.95 m/s.     

Determination of total arsenic by use of a zinc-column arsine generator

A method for the measurement of total arsenic in extracts of environmental materials is described. Arsenic is reduced to arsine with a zinc reductor column, the evolved arsine is decomposed in a heated carbon-tube furnace, and arsenic determined by measurement of its atomic-absorption at 193.7 nm. The detection limit is 0.002 mug/ml and the coefficient of variation is 1.4% at 0.01 mug/ml.     

A microwave-assisted sequential extraction of water and dilute acid soluble arsenic species from marine plant and animal tissues

This paper describes the use of dilute nitric acid for the extraction and quantification of arsenic species. A number of extractants (e.g. water, 1.5 M orthophosphoric acid, methanol-water and dilute nitric acid) were tested for the extraction of arsenic from marine biological samples, such as plants that have proved difficult to quantitatively extract. Dilute 2% (v/v) nitric acid was found to give the highest recoveries of arsenic overall and was chosen for further optimisation. The optimal extraction conditions for arsenic were 2% (v/v) HNO₃, 6 min⁻¹, 90 °C. Arsenic species were found to be stable under the optimised conditions with the exception of the arsenoriboses which degraded to a product eluting at the same retention time as glycerol arsenoribose. Good agreement was found between the 2% (v/v) HNO₃ extraction and the methanol-water extraction for the certified reference material DORM-2 (AB 17.1 and 16.2 μg g⁻¹, respectively, and TETRA 0.27 and 0.25 μg g⁻¹, respectively), which were in close agreement with the certified concentrations of AB 16.4 ± 1.1 μg g⁻¹ and TETRA 0.248 ± 0.054 μg g⁻¹.To preserve the integrity of arsenic species, a sequential extraction technique was developed where the previously methanol-water extracted pellet was further extracted with 2% (v/v) HNO₃ under the optimised conditions. Increases in arsenic recoveries between 13% and 36% were found and speciation of this faction revealed that only inorganic and simple methylated species were extracted.     

Solochrome Violet R als Reagens zur spektrophotometrischen Bestimmung von Mikrogrammengen Molybd?n

Zusammenfassung In der vorliegenden Arbeit wird eine rasche und genaue spektrophotometrische Bestimmung von Mikrogrammengen MolybdÄn beschrieben. Als Reagens wird der Azofarbstoff Solochrome Violet R verwendet. Dieser bildet mit MolybdÄn in sehwach salzsaurem Medium einen rotgefÄrbten Komplex, der selbst bei Anwesenheit von ÄDTA bestÄndig ist. Dadurch ist es möglich, den störenden Einflu\ anderer Ionen, z. B. den des Zirkoniums, auszuschalten. Mit dieser Methode lassen sich noch 2,0 g MolybdÄn/10 ml Me\lösung mit relativ hoher Genauigkeit bestimmen.Wir danken Herrn Prof. Dr. F. Hecht für seine Unterstützung, die für das Zustandekommen dieser Arbeit von gro\em Nutzen war.     

Gas-phase thermolysis of condensed-1,2,4-triazines: interesting routes toward heterocyclic ring systems

Gas-phase thermolysis of thieno[2,3-e][1,2,4]triazines gave benzonitrile, isothiazole, pyridazine, and thieno[2,3-d]thiazole derivatives. Similar transformation of benzo[1,2,4]triazine and phenanthro[9,10-e][1,2,4]triazine derivatives into their corresponding condensed thiazoles has been achieved by heating at 350 °C with sulfur. A mechanism for these pyrolytic transformations was proposed.     

Low volume microwave digestion for the determination of selenium in marine biological tissues by graphite furnace atomic absorption spectroscopy

A microwave digestion method for the determination of marine biological tissues has been developed to allow determination of selenium in small sample sizes (< 0.1 g). The benefits of this technique include maintaining concentrates in extracts without the subsequent over dilution encountered when using larger vessels, increased sample throughput and reduced loss of volatile material. Freeze dried biological material (< 0.1 g) and nitric acid (1 ml) were placed into 7 ml screw top Teflon vessels which are completely sealed on capping. Two 7 ml vials were placed into larger 120 ml vessels fitted with a Teflon spacer and 10 ml of distilled water. The effects of microwave power and time, and sample mass on selenium recovery from three marine standard reference materials (NIST SRM 1566a Oyster Tissue, NRCC DORM-1 Dogfish Muscle and NRCC TORT-1 Lobster Hepatopancreas) were examined. The optimum conditions: 600 W, 2 min; 0 W, 2 min; 450 W, 45 min, allowed quantitative recoveries of selenium from these and three other standard reference materials (NRCC DOLT-1 Dogfish liver, NIST RM-50 Albacore tuna and IAEA MA-A-2 fish flesh). Studies on sample mass showed that the analysis of sample masses from 0.025 to 0.1 g gave selenium concentrations within the certified range. Six species of selenium: selenite, selenate, selenomethionine, selenocysteine, selenocystamine, and trimethyl selenonium were added to oyster, dogfish, and lobster tissues. Recoveries were near quantitative for all species (94–105%) except trimethyl selenonium (90–101%).     

Absorption spectra of 2-styryl-4-phenyl-thiazole ethiodides in organic solvents of varying polarities and determination of the formation constant of the charge transfer complex formed

The electronic absorption spectra of some 2-styryl-4-phenyl-thiazole ethiodides are studied in organic solvents of different polarities. The shorter wavelength band appearing in the visible region is assigned to an intramolecular charge transfer (CT)-transition originating from the phenyl moiety to the positively charged hetero ring, while the longer wavelength one is due to an intermolecular CT-transition from the iodide ion to the 2-styryl-4-phenyl-thiazolinium cation. These assignments are based on the nature of the aldehydic residue and effects of solvent, concentration, and temperature on both the position and absorptivity of the CT complex-band. It is concluded that the CT complex formed will be highly solvated inDMF, DMSO, ethanol and methanol relative to in CHCl₃, dioxane and acetone. The formation constant of the CT complex in solutions of different polarities is determined at different temperatures. Furthermore, the thermodynamic parameters H ^o, G ^o and S ^o for complex formation are calculated and discussed.

---

Absorptionsspektren von 2-Styryl-4-phenyl-thiazol-ethiodiden in verschiedenen Lösungsmitteln und Bestimmung der Bildungskonstanten der Charge-Transfer-Komplexe

Zusammenfassung Die Elektronenanregungsspektren einiger substituierter 2-Styryl-4-phenyl-thiazol-ethiodide wurden in einigen Lösungsmitteln unterschiedlicher Polarität untersucht. Die Absorption bei kürzerer Wellenlänge wird einem intramolekularen Charge-Transfer (CT)-Übergang zugeordnet, die langwellige Bande einem intermolekularen CT-Übergang (Jodid—organ. Kation). Die Diskussion erfolgt basierend auf Substitutions-, Lösungsmittel-, Konzentrations-, und Temperatur-Effekten. Die Komplexbildungskonstanten und die thermodynamischen Parameter H ^o, G ^o und S ^o werden angegeben.

     

Differences in the redistribution of concanavalin A and wheat germ agglutinin binding sites on mouse neuroblastoma cells.

Concanavalin A (Con A), wheat germ agglutinin (WGA), and Ricinus communis agglutinin (RCA) bound with either 125I, fluorescent dyes, or fluorescent polymeric microspheres were used to quantitate and visualize the distribution of lectin binding sites on mouse neuroblastoma cells. As viewed by fluorescent light and scanning electron microscopy, over 10(7) binding sites for Con A, WGA, and RCA appeared to be distributed randomly over the surface of differentiated and undifferentiated cells. An energy-dependent redistribution of labeled sites into a central spot occurred when the cells were labeled with a saturating dose of fluorescent lectin and maintained at 37 degrees C for 60 min. Reversible labeling using appropriate saccharide inhibitors indicated that the labeled sites had undergone endocytosis by the cell. A difference in the mode of redistribution of WGA or RCA and Con A binding sites was observed in double labeling experiments. When less than 10% of the WGA or RCA lectin binding sites were labeled, only these labeled sites appeared to be removed from the cell surface. In contrast, when less than 10% of the Con A sites were labeled, both labeled and unlabeled Con A binding sites were removed from the cell surface. Cytochalasin B uncoupled the coordinate redistribution of labeled and unlabeled Con A sites, suggesting the involvement of microfilaments. Finally, double labeling experiments employing fluorescein-tagged Con A and rhodamine-tagged WGA indicate that most Con A and WGA binding sites reside on different membrane components and redistribute independenty of each other.     

Trichosides A and B,new withanolide glucosides from Tricholepis eburnea

Trichosides A (1) and B (2), new withanolide glucosides, have been isolated from the n-butanolic fraction of the 75% methanolic extract of aerial parts of Tricholepis eburnea. Their structures were elucidated through spectroscopic analysis including ESI-MS, 2D NMR and acid hydrolysis.     

Quadrupole mass filter operation under the influence of magnetic field

This work demonstrates resolution enhancement of a quadrupole mass filter (QMF) under the influence of a static magnetic field. Generally, QMF resolution can be improved by increasing the number of rf cycles an ion experiences when passing through the mass filter. In order to improve the resolution, the dimensions of the QMF or the operating parameters need to be changed. However, geometric modifications to improve performance increase the manufacturing cost and usually the size of the instrument. By applying a magnetic field, a low‐cost, small footprint instrument with reduced power requirements can be realized. Significant improvement in QMF resolution was observed experimentally for certain magnetic field conditions, and these have been explained in terms of our theoretical model developed at the University of Liverpool. This model is capable of accurate simulation of spectra allowing the user to specify different values of mass spectrometer dimensions and applied input signals. The model predicts enhanced instrument resolution R>26 000 for a CO₂ and N₂ mixture with a 200‐mm long mass filter operating in stability zone 3 via application of an axial magnetic field. Copyright © 2013 John Wiley & Sons, Ltd.